Garmin GPS 152H Owner's Manual - Page 27

Using Simulator Mode  WARNING Do not try to navigate using simulator mode because the GPS receiver is turned off. Any satellite signal strength bars shown are simulations and do not represent the strength of actual satellite signals. Simulator mode turns the GPS receiver off for use indoors or for practice using the chartplotter. The chartplotter does not track satellites in simulator mode. appears in the lower-left corner of the main pages to indicate that the unit is in Simulator mode. To turn on Simulator mode: 1. From any Main page, press Menu twice. 2. Select Sys to set speed, track control, and position. Viewing System Information You can view the software version and the unit ID number for your chartplotter. You may need this information to update the system software or when speaking with a Garmin Product Support Representative. 1. From any Main page, press Menu twice. 2. Select Sys, and press Menu. 3. Select Software Version. Appendix Restoring the Original Factory Settings Note: This procedure deletes all settings information you have entered. 1. From any Main page, press Menu twice. 2. Select Sys, and press Menu. 3. Select Restore Garmin Setup. NMEA 0183 The following formats are supported for connection of external devices: GARMIN proprietary Differential GPS (DGPS), NMEA 0183 (version 2.3), RTCM SC-104 input (version 2.0). Approved NMEA 0183 Sentences GPBOD, GPBWC, GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE, GPVTG, GPWPL, GPXTE, and Garmin proprietary sentences PGRME, PGRMM, PGRMZ, and PSLIB. GPS 152H Owner's Manual 23