Garmin GPS 24xd Receiver and Antenna Technical Reference for Garmin NMEA 2000 - Page 2

NMEA 2000 Components Item Description T-connector Garmin Part Number 010-11078-00 In-line terminator 010-11096-00 Power isolator 010-11580-00 Male terminator 010-11080-00 Female termi­ nator 010-11081-00 Power cable 010-11079-00 010-11076-03: 0.3 m (1 ft.) 010-11076-00: 2 m (6.5 ft.) 010-11076-04: 4 m Backbone or drop (13 ft.) cable 010-11076-01: 6 m (20 ft.) 010-11076-02: 10 m (33 ft.) 010-11171-01: 30 m (98 ft.) (spool) Right-angle drop cable 010-11089-01: 0.3 m (1 ft.) 010-11089-00: 2 m (6.5 ft.) Notes Connects devices to the backbone. You must use T-connectors properly when connecting devices to your NMEA 2000 network (Linear Backbone Construction, page 6). You can use this instead of a T-connector and separate male terminator (Network Termination, page 11). Prevents a device from providing power to the NMEA 2000 (Power Isolation, page 10). You must install terminators on both ends of the backbone (Network Termination, page 11). You must install terminators on both ends of the backbone. Connects the NMEA 2000 network to a 12 Vdc power source (Power Connection Considerations, page 7). 2 m (6.5 ft.) 3 A fuse included A cable up to 6 m (20 ft) can be used as a backbone cable or a drop cable. A cable longer than 6m (20 ft) can be used as a backbone cable only. Can be used when connecting to a device with minimal clearance for the rear connectors. 2