Garmin GPSMAP 188C Owners Manual - Page 100
Main Menu: Comm Tab, Alarm Tab
UPC - 753759031923
View all Garmin GPSMAP 188C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Reference Main Menu: Comm Tab/ Alarm Tab Advanced NMEA Setup Page Main Menu-Alarm Tab (System Submenu) 90 Advanced NMEA Output Setup The GPSMAP 188/188C/238 Sounder NMEA data transmission can be customized to change the precision of the Lat/Lon minutes, set up the waypoint IDs, and keep the output rate at two seconds. If the unit is set up to output all of the available NMEA sentences, the output rate may exceed two seconds. The 'Advanced NMEA Output Setup' page allows you to turn on/off the GPS status (GSA. GSV), Waypoint/Route (WPL, RTE), and the Garmin Proprietary sentences. See page 95 for more information on wiring and NMEA data. Lat/Lon Minutes Precision allows you to adjust the number of digits to the right of the decimal point for transmission of NMEA Output, either 2, 3 or 4 digits. The Waypoint ID setting lets you choose to output the waypoint identifiers as names or numbers. To set up the Advanced NMEA page: 1. Highlight 'NMEA In/NMEA Out' in the Serial Data Format field, and press MENU. Select 'NMEA Setup' and press ENTER. 2. To change the settings, place the highlight over the desired field and press ENTER. Make a selection and press ENTER again to accept the selection. GPSMAP 188/188C/238 Sounder NMEA Sentence Output (NMEA version 2.3 compliant) Always transmitted: GPRMC, GPGGA, GPGLL, GPBWC, GPVTG, GPXTE, GPRMB Switchable sentences: GPGSA, GPGSV, GPWPL, GPRTE Garmin proprietary: PGRME, PGRMZ, PGRMM Alarm Tab- contains setting for the unit's alarms. The Alarm tab is divided into three submenus: System alarms, Nav alarms, and Sonar alarms. System Tab Clock - provides an alarm for the system clock. Enter a time in the time field and turn the alarm on and off from the control field menu. Remember to enter alarm times in the same time format (UTC or local) you're using for your system. The unit must be on for the clock alarm to work.