Garmin GPSMAP 441/441s Owner's Manual - Page 12
Viewing System Information, Restoring the Original Factory Settings, Inserting and Removing SD Cards
View all Garmin GPSMAP 441/441s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Getting Started To turn on Simulator mode: 1. From the Home screen, select Configure > System > Simulator. 2. Select Setup to set speed, track control, and position. Viewing System Information You can view the software version, the basemap version, supplemental map information (if applicable), the unit ID number for your chartplotter, and your XM® WX Satellite Weather® Radio ID (if available). You may need this information to update the system software or to purchase additional map data information. From the home screen, select Configure > System > System Information. Inserting and Removing SD Cards Your unit supports Secure Digital (SD) cards. Insert optional BlueChart® g2 Vision® SD cards to view high-resolution satellite imagery and aerial reference photos of ports, harbors, marinas and other points of interest. Use SD cards to transfer data such as waypoints, routes, and tracks to another compatible Garmin unit or a computer (page 45). The SD card slot is located on the lower-right corner of the unit. To insert the SD card, open the access door and press the SD card in until it clicks. Press the card in again and release it to eject it from the chartplotter. Restoring the Original Factory Settings NOTE: This procedure deletes all settings information you have entered. 1. From the Home screen, select Configure > System > System Information > Factory Settings. 2. Select Yes to restore all factory settings, or select No to cancel. The unit reboots and prompts you to adjust unit settings (page 3). GPSMAP 400/500 Series Owner's Manual