Garmin GPSMAP 478 Owner's Manual - Page 20
Using Simulator Mode, Entering a New Location - not turning
UPC - 753759060329
View all Garmin GPSMAP 478 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Getting Started > Using Simulator Mode Using Simulator Mode Simulator Mode is great for practicing with the unit if you are indoors or when satellite signals are not available. All waypoints and routes created in Simulator Mode are retained in memory for future use. By unplugging the GXM 30 antenna and placing the unit in Simulator Mode, you can view simulated weather information. NOTE: Do not try to navigate using Simulator Mode. When the unit is set to Simulator Mode, the GPS receiver is turned off. Any satellite signal strength bars shown are only simulations and do not represent the strength of actual satellite signals. To turn on Simulator Mode: 1. Highlight the GPS tab on the Main Menu. 2. Press Menu to open the GPS tab options menu. 3. Highlight Start Simulator, and press Enter. GPS tab Starting Simulator Mode from the GPS tab Entering a New Location Use the GPS options menu to enter a new location from which to simulate. To enter a New Location using the map: 1. Highlight the GPS tab on the Main Menu. 2. Press Menu to open the options menu. 3. Highlight New Location, and press Enter. 4. Highlight Use Map, and press Enter. 5. Use the ROCKER to move the panning arrow to the location you want on the map, and press Enter. 12 GPSMAP 378/478 Owner's Manual