Garmin GPSMAP 5215 Installation Instructions - Page 14

Garmin marine radar GSD 22 sounder unit xxxx GMS 10 marine network port expander xxxxxxxxxxxxxxxxxxxxxxx To transducer GDL 30/30A XM weather receiver Garmin GPSMAP 3000 series chartplotter Garmin GPSMAP 4000/5000 series chartplotter Connecting a GPSMAP 4000/5000 Series Chartplotter to an Existing Garmin Marine Network Note: When connecting a GPSMAP 4000/5000 series chartplotter to an existing Garmin Marine Network, the GMS 10 can be used but is not necessary. The GPSMAP 4000/5000 series chartplotter has three network ports and acts as a port expander. Wire the GPS antenna and additional NMEA devices to either the existing GPSMAP 3000 series chartplotter or the new GPSMAP 4000/5000 Series chartplotter. The existing GPSMAP 3000 series chartplotter and the new GPSMAP 4000/5000 series chartplotter share NMEA 0183 data and Garmin Marine Network data, but do not share cartography. Note: Every device connected to the Garmin Marine Network must be connected to the power supply for the boat. This diagram shows the network connections; however, it does not show the power connections. Wire each device according to the appropriate installation instructions. Note: This diagram shows the Garmin Marine Network connections; however, it does not show NMEA 2000 or NMEA 0183 connections. 14 GPSMAP 4000/5000 Series Installation Instructions