Garmin GPSMAP 5215 Remote Instructions (Multilingual) - Page 2

Introduction The 4000/5000 Series RF Remote is for use with the following Garmin chartplotters: • GPSMAP 4008 GPSMAP 5008 • GPSMAP 4012 GPSMAP 5012 • GPSMAP 4208 GPSMAP 5208 • GPSMAP 4212 GPSMAP 5212 The remote is used to control the 4000/5000 screens. It can be used up to 10 meters (32 feet) from the chartplotter and does not need to be pointed directly at your chartplotter. The remote operates on two AAA batteries (not included). To replace the batteries, use a small Phillips screwdriver to open the access cover on the rear panel. Use alkaline batteries for best results. Ensure your chartplotter has the current software, available at www.garmin.com. Description of Buttons Pairing buttons-press and hold to pair a remote with a chartplotter. Press and release to select a paired chartplotter. Range (+/-) Rocker-press up, down, left, and right to move the map pointer and enter data. SELECT-press to confirm messages and select items. Up/Down MENU-press to view additional options on most screens. MARK LOCK-press to lock all remote functions. Press again to unlock. The remote beeps when it is locked and a button is pressed. MOB (Man Overboard)-press to mark your current location as a Man Overboard point. HOME MOB (Man OverBoard) HOME-press at any time to return to the Home screen. MARK-press to mark your current location as a waypoint. Up/Down-press to highlight menu items. Range (+/-)- press up (+) and down (-) to increase and decrease the map zoom scale. Pairing buttons Rocker SELECT MENU LOCK Getting Started Use one of the three pairing buttons to pair your remote with a specific chartplotter. If you have more than one chartplotter, this allows you to separately control up to three chartplotters. To allow wireless connections on your chartplotter: 1. From the Home screen, select Configure > Communications > Wireless Devices. 2. Set Allow New Connections to Yes. To pair the remote with a chartplotter: 1. Press and hold one of the Pairing Buttons until "New Wireless Remote Found" appears on the chartplotter. 2. Select Connect on your chartplotter. To select a chartplotter, press and release the Pairing Button that is paired with the chartplotter you want to control. Specifications • Size: 135 mm H x 50 mm W x 25.7 mm D (5.3" x 2" x 1") • Weight: 77 g (2.7 oz), without battery 101 g (3.6 oz), with batteries • Case: waterproof to IEC 529-IPX-7 • Frequency: 2.46 GHz • Max Range: 10 m (32 ft); this value may vary slightly, depending on the installation of the chartplotter • Battery Life: 100 days when used 15 minutes per day 3 years shelf life • Operating Temperature Range: -15°C to 70°C (5°F to 158°F) • Storage Temperature Range: -40°C to 85°C (-40°F to 185°F)