Garmin GPSMAP 531s Owner's Manual - Page 46
Viewing and Synchronizing Fuel Gauges, Configuring Engine Gauges
View all Garmin GPSMAP 531s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Viewing Information Configuring Engine Gauges The amount of fuel on board can be represented by either the total fuel level (numeric) or by individual tank level (graphic). From the Home screen, select Information > Dashboard > Engine > MENU > Gauge Setup > Fuel Display. • Use Total Fuel Level-select to display a numeric value for the total fuel level. • Use Fuel Tank Levels > Num. Tanks-select to display a graphical representation of all the specified tanks. Viewing and Synchronizing Fuel Gauges Viewing Fuel Gauges To view engine information, your chartplotter must be connected to a device capable of measuring fuel level, fuel flow, or both. From the Home screen, select Information > Dashboard > Engine. Synchronizing Fuel Gauge Readings with Fuel Levels From the Home screen, select Information > Dashboard > Fuel (or Engine) > MENU. • Fill Up All Tanks-select when your tanks are full. The fuel level is reset to maximum capacity. Adjust if necessary. • Add Fuel To Boat-select when you have added less than a full tank. Enter the amount of fuel added. Select Done. An estimate of the fuel added appears. Adjust if necessary. • Set Total Fuel Onboard-select to specify the total fuel in your tanks. Select Done. 40 GPSMAP 400/500 Series Owner's Manual