Garmin GPSMAP 62st Quick Start Manual - Page 9

Using Sight 'N Go, Attaching the Wrist Strap, Attaching the Carabiner

Get Garmin GPSMAP 62st PDF manuals and user guides View all Garmin GPSMAP 62st manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Using Sight 'N Go NOTE: Sight 'N Go is available only with the GPSMAP 62s and GPSMAP 62st. You can point the device at an object in the distance, such as a bridge, lock in the direction, and then navigate to the object. 1. From the main menu, select Sight 'N Go. 2. Point the device at an object. 3. Select Lock Direction > Set Course. 4. Use the compass to navigate to the object. Attaching the Wrist Strap 1. Place the loop of the wrist strap through the slot opening at the bottom of the device. 2. Route the strap through the loop, and pull it tight. Attaching the Carabiner Clip 1. Position the carabiner clip in the slots on the mounting spine. 2. Slide the clip up until it locks in place. GPSMAP 62 Series Quick Start Manual 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
GPSMAP 62 Series Quick Start Manual
Using Sight ‘N Go
NOTE
: Sight ‘N Go is available only
with the GPSMAP 62s and GPSMAP
62st.
You can point the device at an object
in the distance, such as a bridge, lock
in the direction, and then navigate to
the object.
1. From the main menu, select
Sight
‘N Go
.
2. Point the device at an object.
3. Select
Lock Direction
>
Set
Course
.
4. Use the compass to navigate to the
object.
Attaching the Wrist Strap
1. Place the loop of the wrist strap
through the slot opening at the
bottom of the device.
2. Route the strap through the loop,
and pull it tight.
Attaching the Carabiner
Clip
1. Position the carabiner clip in the
slots on the mounting spine.
2. Slide the clip up until it locks in
place.