Garmin GPSMAP 720s Owner's Manual - Page 82
Transducer Configuration, Setting the Keel Offset, Setting the Water Temperature Offset
View all Garmin GPSMAP 720s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Sonar Transducer Configuration Setting the Keel Offset The keel offset compensates for the surface reading for the depth of a keel, making it possible to measure depth from the bottom of the keel instead of from the transducer location. Enter a positive number to offset for a keel. You can enter a negative number to compensate for a large vessel that may draw several feet of water. 1. Complete an action, based on the location of the transducer: • If the transducer is installed at the water line ➊, measure the distance from the transducer location to the keel of the boat. Enter this value in step 3 as a positive number. • If the transducer is installed at the bottom of the keel ➋, measure the distance from the transducer to the water line. Enter this value in step 3 as a negative number. ➊ ➋ Keel Offset 2. From the Home screen, select Configure > My Boat > Keel Offset. 3. Enter the distance measured in step 1. Ensure that you enter a positive or a negative number based on the location of the transducer. 4. Select Done. Setting the Water Temperature Offset You must have a NMEA 0183 water-temperature sensor or a temperature-capable transducer to measure water temperature. The temperature offset compensates for the temperature reading from a temperature sensor. 1. Measure the water temperature using the temperature sensor or temperature-capable transducer that is connected to the chartplotter. 2. Measure the water temperature using a different temperature sensor or a thermometer that is known to be accurate. 3. Subtract the water temperature measured in step 1 from the water temperature measured in step 2. This is the temperature offset. Enter this value in step 5 as a positive number if the sensor connected to the chartplotter measures the water temperature as being colder than it actually is. Enter this value in step 5 as a negative number if the sensor connected to the chartplotter measures the water temperature as being warmer than it actually is. 4. From the Home screen, select Configure > My Boat > Temp Offset. 5. Enter the temperature offset calculated in step 3. 6. Select Done. 78 GPSMAP 700 Series Owner's Manual