Garmin GPSMAP 7215 Installation Instructions - Page 11
NOTES, do not show the power connections, do not show NMEA 2000 or NMEA 0183 connections - gps receiver
View all Garmin GPSMAP 7215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
GSD 22 sounder unit Garmin marine radar GMS 10 marine network port expander xxxx xxxxxxxxxxxxxxxxxxxxxxx To transducer GDL 30A XM weather receiver Garmin GPSMAP 3000 series chartplotter Garmin GPSMAP 6000/7000 series chartplotter Connecting a GPSMAP 6000/7000 Series Chartplotter to an Existing Garmin Marine Network Notes: • Every device connected to the Garmin Marine Network must be connected to the power supply for the boat. These diagrams show the network connections; however, they do not show the power connections. Wire each device according to the appropriate installation instructions. • These diagrams show the Garmin Marine Network connections; however, they do not show NMEA 2000 or NMEA 0183 connections. • When connecting a GPSMAP 6000/7000 series chartplotter to an existing Garmin Marine Network, the GMS 10 can be used but is not necessary. The GPSMAP 6000/7000 series chartplotter has three network ports and acts as a port expander. Wire the GPS antenna and additional NMEA devices to either an existing chartplotter or the new GPSMAP 6000/7000 Series chartplotter. The existing chartplotter and the new GPSMAP 6000/7000 series chartplotter share NMEA 0183 data and Garmin Marine Network data. GPSMAP 6000/7000 Series Installation Instructions 11