Garmin GPSMAP 8012 MFD Quick Start Manual - Page 2

Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. GPSMAP 8000 Series Front View The location of items varies based upon the model. This image and table are representations of the GPSMAP 8000 series devices. 2 Select an option. Inserting a Memory Card You can use optional memory cards in the chartplotter. Map cards allow you to view high-resolution satellite imagery and aerial reference photos of ports, harbors, marinas, and other points of interest. You can use blank memory cards to transfer data such as waypoints, routes, and tracks to another compatible Garmin chartplotter or a computer. 1 Open the door À on the memory card reader. À Power key Á Automatic backlight sensor  Touchscreen Tips and Shortcuts • Select Home from any screen to return to the Home screen. • Select Menu from any main screen to access additional settings about that screen. • Press to adjust the backlight and lock the touchscreen. • Hold to turn the chartplotter on or off. GPS Satellite Signals When you turn on the chartplotter, the GPS receiver must collect satellite data and establish the current location. When the chartplotter acquires satellite signals, appears at the top of the Home screen. When the chartplotter loses satellite signals, disappears and a flashing question mark appears over on the chart. For more information about GPS, go to www.garmin.com / aboutGPS. Using the Touchscreen • Tap the screen to select an item. • Drag or swipe your finger across the screen to pan or scroll. • Pinch two fingers together to zoom out. • Spread two fingers apart to zoom in. Locking the Touchscreen You can lock the touchscreen to prevent inadvertent screen touches. 1 Select . 2 Select Lock Touchscreen. Adjusting the Backlight 1 Select Settings > System > Display > Backlight. TIP: Press from any screen to access the backlight settings. 2 Select an option: • Adjust the backlight level. • Select Enable Auto Backlight or Auto. Adjusting the Color Mode 1 Select Settings > System > Display > Color Mode. 2 Insert the memory card Á with the label facing away from the door. 3 Press the card in until it clicks. 4 Close the card reader door. Waypoints Waypoints are locations you record and store in the device. Marking Your Present Location as a Waypoint From any screen, select Mark. Creating a Waypoint at a Different Location 1 Select Nav Info > Manage Data > Waypoints > Create Waypoint. 2 Select an option: • To create the waypoint by entering position coordinates, select Enter Coordinates, and enter the coordinates. • To create the waypoint using a chart, select Use Chart, select the location, and select Move Waypoint. Marking and Navigating to an MOB Location When you mark a waypoint, you can designate it as a man overboard (MOB) location. Select an option: • From any screen, select Mark > Man Overboard > Yes. • From any screen, select Man Overboard > Yes. An international MOB symbol marks the active MOB point and the chartplotter sets a direct course back to the marked location. Navigation Navigating to a Point on the Chart CAUTION The Auto Guidance feature is based on electronic chart information. That data does not ensure obstacle and bottom clearance. Carefully compare the course to all visual sightings, and avoid any land, shallow water, or other obstacles that may be in your path. When using Go To, a direct course and a corrected course may pass over land or shallow water. Use visual sightings, and steer to avoid land, shallow water, and other dangerous objects. NOTE: The offshore Fishing chart is available with premium charts, in some areas. NOTE: Auto Guidance is available with premium charts, in some areas. 1 From the Navigation chart or Fishing chart, select a location. 2