Garmin GSD 22 Digital Remote Sounder Marine Ethernet Install Instructions - Page 4
Installation Instructions
 |
View all Garmin GSD 22 Digital Remote Sounder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 1. Cleanly cut your Ethernet cable to the desired length. Retain the cut connection for Step 4. 2. Remove strain relief nut from cable connection housing and slide onto cut end of the cable as shown in Figure 2. Strain Relief Cut End of Cable Figure 2 3. Feed the cable end through connection housing and threaded collar as shown in Figure 3. Strain Relief Connection Housing Figure 3 2 Marine Ethernet Connection
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
2
Marine Ethernet Connection
I
NSTALLATION
I
NSTRUCTIONS
I
NSTALLATION
I
NSTRUCTIONS
1.
Cleanly cut your Ethernet cable to the desired length. Retain the cut connection for Step 4.
2.
Remove strain relief nut from cable connection housing and slide onto cut end of the cable as shown in Figure 2.
Strain Relief
Cut End of
Cable
Figure 2
3.
Feed the cable end through connection housing and threaded collar as shown in Figure 3.
Connection
Housing
Strain Relief
Figure 3