Garmin GT15M-IH Plastic In-Hull Mid-Band CHIRP Transducer 85-165 kHz 600W 8-pin - Page 2
Updating the Device Software
View all Garmin GT15M-IH Plastic In-Hull Mid-Band CHIRP Transducer 85-165 kHz 600W 8-pin manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Updating the Device Software Before you can update the software, you must obtain a software-update memory card or load the latest software onto a memory card. 1 Turn on the chartplotter. 2 After the home screen appears, insert the memory card into the card slot. NOTE: In order for the software update instructions to appear, the device must be fully booted before the card is inserted. 3 Follow the on-screen instructions. 4 Wait several minutes while the software update process completes. 5 When prompted, leave the memory card in place and restart the chartplotter manually. 6 Remove the memory card. NOTE: If the memory card is removed before the device restarts fully, the software update is not complete. Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin. © 2015 Garmin Ltd. or its subsidiaries www.garmin.com/support