Garmin GTEMP10-TH Thru-hull Temp Sensor Installation Instructions - Page 3
Specifications
View all Garmin GTEMP10-TH Thru-hull Temp Sensor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Temperature Location Source Values Location Water Air outside Air inside Engine room Main cabin Live well Bait well Refrigeration Heating system Freezer Exhaust TEMPSOURCE Value 0 1 2 3 4 5 6 7 8 13 14 Type Transmit Transmit Transmit Transmit Transmit Transmit PGN Description 126464 Transmit PGN list group function 126993 Heartbeat 126996 Product information 126998 Configuration information 130312 Temperature 130316 Temperature, extended range Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. NMEA 2000® and the NMEA 2000 logo are registered trademarks of the National Marine Electronics Association. Configuring the Temperature Offset when the Menu Option Is Not Displayed When the temperature data displayed on the gauge connected to your adapter is different from the temperature data displayed on other devices, you can configure the temperature offset to increase or decrease the displayed temperature. 1 From the NMEA 2000 device list, select the NMEA 2000 thru- hull device. 2 Select a device. 3 If necessary, select Review or Config.. 4 Select Generic Config. or Generic Configuration. 5 Enter TEMPOFFSET=, followed by a positive or negative decimal number, followed by Done. For example, enter TEMPOFFSET=-2.5Done to decrease the displayed temperature by 2.5ºC. Configuring the Sensor Number when the Menu Option Is Not Displayed 1 From the NMEA 2000 device list, select the NMEA 2000 thru- hull device. 2 Select a device. 3 If necessary, select Review or Config.. 4 Select Generic Config. or Generic Configuration. 5 Enter INSTANCE=2, followed by a positive decimal number, followed by Done. 6 Repeat steps 1 through 3 for other devices assigned to a temperature source. For example, when to adapters are assigned the value of Live Well, assign INSTANCE=1 to the first adapter and INSTANCE=2 to the second adapter. Specifications Hull thickness Power input Power consumption Operating temperature range Cable length Minimum 0 mm (0 in.) Maximum 57 mm (2.25 in.) From 9 to 32 Vdc 0.24 W (20 mA at 12V) From -25 to 80ºC (from -13 to 176°F) 1.8 m (6 ft.) NMEA 2000 PGN Type PGN Description Transmit and receive 059392 ISO acknowledgment Receive 059904 ISO request Transmit and receive 060928 ISO address claim Transmit and receive 065240 ISO commanded address Transmit and receive 126208 NMEA®: Command, request, and acknowledge group function 3