Garmin GTM 25 Instructions (Multilingual) - Page 6
Testing the Traffic Receiver
UPC - 753759084462
View all Garmin GTM 25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Testing the Traffic Receiver • Observe the LED: When the traffic receiver is connected to power, the red LED is on. The traffic receiver may take up to five minutes to acquire data. • Check the map: Check the map on the GPS device for traffic incidents or a traffic icon. Refer to the owner's manual. tip: If you have trouble receiving traffic information, you may be in a poor signal area. Drive your vehicle to an open area, out of garages and away from tall buildings. Connect the external antenna, if necessary. • Verify your service area: Check for service from the pay service or free or premium services. note: Heated (metalized) windshields could degrade the performance of the traffic receiver. EN- GTM 25 Instructions
EN–±
GTM 25 Instructions
Testing the Traffic Receiver
Observe the LED:
When the traffic receiver
is connected to power, the red LED is on.
The traffic receiver may take up to five
minutes to acquire data.
Check the map:
Check the map on the GPS
device for traffic incidents or a traffic icon.
Refer to the owner’s manual.
TIP:
If you have trouble receiving traffic
information, you may be in a poor signal area.
Drive your vehicle to an open area, out of
garages and away from tall buildings. Connect
the external antenna, if necessary.
Verify your service area:
Check for service
from the pay service or free or premium
services.
NOTE:
Heated (metalized) windshields
could degrade the performance of the traffic
receiver.
•
•
•