Garmin GTN 635 XM Satellite Radio Activation Instructions - Page 23
Verify Temperature/Dewpoints, 4 Refreshing, 5 Deactivating and Reactivating the GDL 69 Series
View all Garmin GTN 635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4.3.5 Verify Temperature/Dewpoints To display Temperature/Dewpoints on the NAV Weather Page: 1. Select the NAV Weather Page. 2. Press CRSR. The upper left hand corner data field flashes. 3. Turn the small right knob and select „TEMP/DP‟. 4. Press CRSR. The Temperature/Dewpoints are displayed on the NAV Weather Page similar to Figure 4-7, if available. Figure 4-7. Temperature/Dewpoints Page NOTE For all 400/500 Series: After verifying that all weather products have been received, leave unit on for an additional 1.5 hours to allow subscription lock-in process to take place. 4.4 Refreshing If the unit is not activated after 1.5 hours a „refresh‟ maybe needed. To accomplish this go to the website https://care.siriusxm.com/retailrefresh_view.action as explained in Section 2.2. When asked for the Radio ID number on the website, enter the Data ID number and then follow the steps as outlined on the website. If you still are having trouble, call Garmin technical support using the telephone numbers listed at the front of this guide. 4.5 Deactivating and Reactivating the GDL 69 Series When the GDL 69 Series is not properly activated, in some cases it may be necessary to perform a full deactivation and reactivation of the system in order to make it work properly. This procedure is complicated and should never be attempted without the guidance of Garmin AT technical support personnel. Please contact Garmin AT technical support using the telephone numbers listed at the front of this guide. 190-00355-04 Rev. J Page 17 GDL 69/69A XM Satellite Radio Activation Procedures