Garmin GTX 328 Pilot's Guide - Page 6

Pressure Alt, Flight Time, Start/stop, Altitude Monitor, Oat/dalt, Count Up Timer, Count Down Timer - install manual

Get Garmin GTX 328 PDF manuals and user guides View all Garmin GTX 328 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Function Display PRESSURE ALT: Displays the altitude data supplied to the GTX 328 in feet, hundreds of feet (i.e., flight level), or meters, (dependent upon installation configuration. FLIGHT TIME: Timer start is configured as either Manual or Automatic. When Manual, displays the Flight Time, controlled by the START/STOP and CLR keys. When Automatic, the timer begins when take off is sensed. ALTITUDE MONITOR: Controlled by START/STOP Key. Activates a voice alarm and warning annunciator when altitude limit is exceeded. OAT/DALT: Displayed when the GTX 328 is configured with temperature input. Displays Outside Air Temperature and Density Altitude. COUNT UP TIMER: Controlled by START/STOP and CLR keys. COUNT DOWN TIMER: Controlled by START/STOP, CLR, and CRSR keys. The initial Count Down time is entered with the 0 - 9 keys. CONTRAST: This page is only displayed if manual contrast mode is selected during installation configuration. Contrast is controlled by the 8 and 9 keys. DISPLAY: This page is only displayed if manual backlighting mode is selected during installation configuration. Backlighting is controlled by the 8 and 9 keys. Altitude Trend Indicator When the 'PRESSURE ALT' page is displayed, an arrow may be displayed to the right of the altitude, indicating that the altitude is increasing or decreasing. One of two sizes of arrows may be displayed depending on the vertical speed rate. The sensitivity of these arrows is set by an authorized Garmin Aviation Service Center. The GTX 328's options are normally set at time of installation. To request any changes of the GTX 328 parameters, contact an authorized Garmin Aviation Service Center.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
PRESSURE ALT:
Displays the altitude data supplied to the
GTX 328
in feet,
hundreds of feet (i.e., flight level), or meters, (dependent upon installation
configuration.
FLIGHT TIME:
Timer start is configured as either Manual or Automatic.
W
hen Manual, d
isplays the Flight Time, controlled by the
START/STOP
and
CLR
keys
.
When
Automatic
, the timer begins when take off is sensed.
ALTITUDE MONITOR:
Controlled by
START/STOP
Key.
Activates a
voice alarm and warning annunciator when altitude limit is exceeded.
OAT/DALT:
Displayed when the GTX 328 is configured with temperature
input.
Displays Outside Air Temperature and Density Altitude.
COUNT UP TIMER:
Controlled by
START/STOP
and
CLR
keys.
COUNT DOWN TIMER:
Controlled by
START/STOP
,
CLR
, and
CRSR
keys.
The initial Count Down time is entered with the
0
–
9
keys.
CONTRAST:
This page is only displayed if manual contrast mode is
selected during installation configuration.
Contrast is controlled by the
8
and
9
keys.
DISPLAY:
This page is only displayed if manual backlighting mode is selected
during installation configuration.
Backlighting is controlled by the
8
and
9
keys.
Altitude Trend Indicator
When the ‘PRESSURE ALT’ page is displayed, an arrow may be displayed to the right of
the altitude, indicating that the altitude is increasing or decreasing.
One of two sizes of arrows
may be displayed depending on the vertical speed rate.
The sensitivity of these arrows is set by
an authorized Garmin Aviation Service Center.
The GTX 328’s options are normally set at time of installation.
To request any changes of
the GTX 328 parameters, contact an authorized Garmin Aviation Service Center.
Function Display