Garmin HVS 16X Technical Specifications - Page 35
Setup, Manual, Connect, Disconnect, Sensor Configuration F6, Reset Unit, Reset, NonVol, NMEA
UPC - 753759077808
View all Garmin HVS 16X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Menus File Menu The File Menu allows you to open, save, and print sensor configurations. The items in the File Menu work like most Windows-based programs. Comm Menu The Comm (Communication) Menu allows you to set the port number and baud rate, as well as connect to the sensor and disconnect from the sensor. Setup: Opens the Comm Setup window. Select the serial port to which the sensor is connected from the drop-down list. Select Auto (the program determines the baud rate on its own) or Manual (you enter the baud rate) for the baud rate entry. Connect: Select Connect to connect to the sensor in order to change or view the configuration. Disconnect: Select Disconnect to disconnect from the sensor. Config Menu The Config (Configuration) Menu allows you to configure the sensor as it is connected. Sensor Configuration (F6): Opens the Sensor Configuration window, shown to the right. Many of the fields in this window should not be changed. Refer to the beginning of this manual for information on many of these fields. This window is used to enter a new latitude, longitude, and altitude for the sensor. This is especially helpful when you are programming the sensor for use in a particular geographic location. Click Reset Unit to perform a reset on the unit, much like cycling the power. Resetting the non-volatile memory (Reset NonVol) clears all of the data from the nonvolatile memory. NMEA Sentence Selections (F7): Displays the NMEA Sentence Selections window. If the sentence is enabled, a check mark appears in the box to the left of the sentence name. Click the box to enable or disable to the sentence. 190-00228-08 GPS 16x Technical Specifications Page 31 Rev. B