Garmin Intelliducer NMEA 2000 Thru-hull Sensor 0-12° deadrise Installatio - Page 1
Garmin Intelliducer NMEA 2000 Thru-hull Sensor 0-12° deadrise Manual
View all Garmin Intelliducer NMEA 2000 Thru-hull Sensor 0-12° deadrise manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Transom Mount Intelliducer™ Installation Instructions To obtain the best possible performance, install your Transom Mount Intelliducer according to the following instructions. If you experience difficulty during the installation, contact Garmin Product Support, or seek the advice of a professional installer. This Transom Mount Intelliducer provides depth information either to a NMEA 0183compatible device, or to your existing NMEA 2000® network, depending on the model. For more information about NMEA 2000, visit www.garmin.com. WARNING: See the Important Safety and Product Information guide in the product box for product warnings and other important information. Product Registration Help us better support you by completing our online registration today! Connect to our Web site at http://my.garmin.com. Keep the original sales receipt, or a photocopy, in a safe place. For future reference, write the serial number assigned to your Intelliducer in the space provided. The serial number is located on a sticker around the cable. Serial number Contact Garmin Contact Garmin if you have any questions while installing or using your Intelliducer. In the USA contact Garmin Product Support by phone: (913) 397-8200 or (800) 800-1020, or go to www.garmin.com/support/. In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 2380000 (within the UK). Packing List and Tools Needed Before installing your Intelliducer, confirm that your package includes the following items. If any parts are missing, contact your Garmin dealer immediately. Standard Package • Transom Mount Intelliducer (not pictured) A - 5 mm flat washers (2) B - 5 × 30 mm screws (2) C - 10-32 lock nut (1) A G E B C F H D D - 4 × 12 mm screw (4) J E - 10-32 × 1.75 in. screw (1) F - 1/4 in. cable clamps (2) I K G - Plastic spacer (1) H - 1/4 in. rubber washer (1) Tools Needed • Drill and drill bits I - Cable tie, 5.6 in. (4) J - Cable entry cover (1) • 3/8 in. (9.5 mm) wrench or socket • Masking tape K - NMEA 2000 T-connector (1) (NMEA 2000 Intelliducer only) • Number 2 Phillips screwdriver • Marine sealant March 2008 190-00889-01 Rev. B Printed in Taiwan