Garmin Nuvi 265WT Quick Start Manual - Page 3

Step 1: Mount Your nüvi 1. Plug the vehicle power cable into the back of your nüvi. 2. Snap the cradle onto the suction cup arm. 3. Clean and dry your windshield and the suction cup with a lint-free cloth. Remove the clear plastic from the suction cup. Place the suction cup on the windshield. 4. Flip the lever back toward the windshield. 5. Fit the bottom of your nüvi into the cradle. 6. Tilt your nüvi back until it snaps into place. 7. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in and the vehicle is running. 8. If you are using a traffic receiver in Europe, connect the external antenna to the traffic receiver and secure it to the windshield using the suction cups. (Traffic receivers are included in some nüvi 205W series packages.) Suction cup mount Cradle Vehicle power cable Step 2: Configure Your nüvi To turn your nüvi on, slide the Power key to the left. Follow the on-screen instructions. To turn your nüvi off, slide the Power key to the left. Step 3: Acquire Satellites 1. Go outdoors to an open area, away from tall buildings and trees. 2. Turn on your nüvi. nüvi 205W series quick start manual