Garmin Nuvi 755T Quick Start Manual - Page 3
Step 1: Mount the nüvi, Step 3: Acquire Satellites - cradle
UPC - 753759077730
View all Garmin Nuvi 755T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Step 1: Mount the nüvi 1. Remove the clear plastic from the suction cup. Clean and dry your windshield and the suction cup with a lint-free cloth. 2. Place the suction cup on the windshield. 3. Plug the vehicle power cable into the power connector on the right side of the cradle. Cradle Power cable 4. Snap the cradle onto the suction cup arm. Suction cup mount 7. Tilt the nüvi back until it snaps into place. 8. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in and your vehicle is running. 9. If you are using a traffic receiver in Europe, secure the antenna on the traffic receiver to the windshield using the suction cups. (The traffic receiver is included in some nüvi packages.) 5. Flip the lever back, toward the windshield. 6. Fit the bottom of your nüvi into the cradle. Step 2: Configure the nüvi To turn on your nüvi, slide the Power key to the left. Follow the on-screen instructions. Step 3: Acquire Satellites 1. Go outdoors to an open area, out of garages, and away from tall buildings. 2. Stop your vehicle, and turn on the nüvi.