Garmin PRO 70 Owner's Manual - Page 3
Getting Started, Setting Up the Pro 70 System, Device Overviews, Pro 70 Handheld Device - dog collar
View all Garmin PRO 70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Setting Up the Pro 70 System Before you can use the Pro 70 system, you must set up the devices. 1 Attach the dog collar device to the collar strap (Attaching the Dog Collar Device to the Collar Strap). 2 Charge the handheld device (Charging the Handheld Device). 3 Charge the dog collar device (Charging the Collar). 4 Turn on the devices (Turning On the Dog Collar Device). 5 If necessary, pair the dog collar device with the handheld device (Pairing a Dog Collar Device with the Handheld Device). Device Overviews Pro 70 Handheld Device Attaching the Dog Collar Device to the Collar Strap 1 With the buckle facing outward, insert the end of the collar strap through theÀslot on the collar device. Á 2 Pull most of the collar strap through the two slots on the  dog device. 3 Insert the end of the collar strap through the slot on the à opposite side of the device. 4 Pull the strap until it is tight across the front of the device. Charging the Handheld Device You should fully charge the battery before you use the device for the first time or whenever the battery is low (Checking the Battery Level). It is normal for the battery to discharge in approximately 7 to 10 weeks when the device is not in use. Charging a fully depleted battery takes about 2 hours. NOTE: The device will not charge when it is outside the temperature range of 32° to 104°F (0° to 40°C). 1 Lift the weather cap . À Intensity level and training mode dial À Battery level Á Dog collar device toggle switch  Training keys à Pro 70 Dog Device Power key À Status LED Á Lights  Contact points à Charging clip contacts Ä Getting Started 2 Plug the small end of the power cable into the mini-USB port on the device. Á 3 Plug the other end of the power cable into an appropriate power source. The status LED is solid red when the device is charging. 4 After the status LED turns solid green, unplug the power cable from the device. Charging the Collar NOTICE To prevent corrosion, thoroughly dry the contacts on the collar and the surrounding area before connecting the charging clip. You should fully charge the battery before you use the device for the first time or whenever the battery is low (Checking the Battery Level). It is normal for the battery to discharge in approximately 7 to 10 weeks when the device is not in use. Charging a fully depleted battery takes about 2 hours. 1