Garmin RV 785 and Traffic Owners Manual - Page 21

2 Hold a preset number, such as Preset 1. 3 Select a contact. Disconnecting a Bluetooth Device You can temporarily disconnect a Bluetooth device without deleting it from the paired devices list. The Bluetooth device can connect to your Garmin device automatically in the future. 1 Select Settings > Bluetooth. 2 Select the device to disconnect. Deleting a Paired Bluetooth Device You can delete a paired Bluetooth device to prevent it from automatically connecting to your Garmin device in the future. Deleting a paired smartphone also deletes all synced phonebook contacts and call history from your Garmin device. 1 Select Settings > Bluetooth. 2 Next to the Bluetooth device name, select > Forget. Traffic NOTICE Garmin is not responsible for the accuracy or timeliness of the traffic information. Your device can provide information about traffic on the road ahead or on your route. You can set your device to avoid traffic when calculating routes, and to find a new route to your destination if a large traffic delay occurs on your active route (Traffic Settings, page 20). The traffic map allows you to browse the map for traffic delays in your area. To provide traffic information, your device must be receiving traffic data. • Product models ending with MT can receive traffic data from an over-the-air broadcast signal using the built-in traffic receiver and the included vehicle power cable (Receiving Traffic Data Using a Traffic Receiver, page 17). • All product models can receive subscription-free traffic data using the Garmin Drive app (Receiving Traffic Data Using Your Smartphone, page 17). • All product models can receive traffic data using an over-theair traffic receiver cable accessory (Receiving Traffic Data Using a Traffic Receiver, page 17). Go to your product page at garmin.com to find and purchase a compatible traffic receiver cable accessory. Traffic data is not available in all areas. For information about traffic coverage areas, go to garmin.com/traffic. Receiving Traffic Data Using Your Smartphone Your device can receive subscription-free traffic data while connected to a smartphone running the Garmin Drive app. 1 Connect your device to the Garmin Drive app (Live Services, Traffic, and Smartphone Features, page 15). 2 On your Garmin device, select Settings > Navigation > Traffic, and verify the Traffic check box is selected. Receiving Traffic Data Using a Traffic Receiver NOTICE Heated (metallized) windshields could degrade the performance of the traffic receiver. A traffic receiver receives traffic data from an over-the-air broadcast signal, where available. To receive over-the-air traffic data, the device must be connected to vehicle power using a traffic-compatible power cable. A traffic receiver is included with some product models (Traffic, page 17). If your product model does not include a traffic receiver, you can go to your product page at garmin.com to find and purchase a compatible traffic receiver cable accessory. Traffic data is not available in all areas. For information about traffic coverage areas, go to garmin.com/traffic. Connect the device to vehicle power using the traffic compatible power cable (Mounting and Powering the Garmin Device in Your Vehicle, page 1). If your product model includes traffic data, the vehicle power cable included with your device is traffic compatible. If you purchased a traffic receiver cable as an accessory, you should use the accessory cable to connect the device to vehicle power. When you are within a traffic coverage area, your device can display traffic information and help you avoid traffic delays. Enabling Traffic You can enable or disable traffic data. 1 Select Settings > Navigation > Traffic. 2 Select the Traffic check box. Voice Command NOTE: Voice command is not available for all languages and regions, and may not be available on all models. NOTE: Voice Activated Navigation may not achieve desired performance when in a noisy environment. Voice command allows you to use your device by saying words and commands. The voice command menu provides voice prompts and a list of available commands. Setting the Wakeup Phrase The wakeup phrase is a word or phrase you can say to activate voice command. The default wakeup phrase is OK Garmin. TIP: You can reduce the chance of accidental voice command activation by using a strong wakeup phrase. 1 Select > Voice Command > > Wake Up Phrase. 2 Enter a new wakeup phrase. The device indicates the strength of the wakeup phrase as you enter the phrase. 3 Select Done. Activating Voice Command 1 Say OK Garmin. The voice command menu appears. 2 Say a command from the menu. Traffic 17