Garmin Reactor 40 Kicker Autopilot Reactor 40 Kicker Mercury 8 through 99 HP I
Garmin Reactor 40 Kicker Autopilot Manual
![]() |
View all Garmin Reactor 40 Kicker Autopilot manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin Reactor 40 Kicker Autopilot manual content summary:
- Garmin Reactor 40 Kicker Autopilot | Reactor 40 Kicker Mercury 8 through 99 HP I - Page 1
Steering Actuator Installation Examples Reactor™ 40 Kicker Mercury 8 through 9.9 HP Installation Examples You can use these photographic examples to help when following the instructions included with your Reactor 40 Kicker and Mercury 8 through 9.9 HP motor. Removing the Tiller Lock NOTICE: You - Garmin Reactor 40 Kicker Autopilot | Reactor 40 Kicker Mercury 8 through 99 HP I - Page 2
NOTE: The existing tiller throttle linkage rod must be replaced with the new linkage rod ➊ in parts bag 3. RPM Cable Installed on Spark Plug Cable Exterior RPM Cable NOTE: The RPM cable cannot be shortened. Excess RPM cable must be secured inside the cowling in a location
![](/manual_guide/products/garmin-reactor-40-kicker-autopilot-reactor-40-kicker-mercury-8-99-hp-installation-examples-5a5cee2/1.png)
Reactor™ 40 Kicker Mercury 8 through 9.9 HP
Installation Examples
You can use these photographic examples to help when following the
instructions included with your Reactor 40 Kicker and Mercury 8 through 9.9
HP motor.
Removing the Tiller Lock
NOTICE:
You must use caution when disassembling the motor to remove the tiller
lock and installing the steering and throttle actuators. The provided photos
are examples, and may not accurately represent your motor. For further
information, you may need to consult your motor manufacturer for guidance.
Garmin is not responsible for damage caused to your motor when removing
the tiller lock or installing this product.
NOTE
: If your motor has a tiller lock
➊
, it must be removed before installing
the steering actuator. Remove the bolts
➋
to access the tiller lock assembly.
Tiller Lock
Remove the tiller lock assembly
➌
before installing the linkage arm assembly.
Removing the Tiller Lock
Steering Actuator Installation Examples
Installing the Steering Actuator Bracket Between the Tiller Arm and Motor
Complete Steering Actuator Installation
Steering Actuator Spacer Stack Order
April 2020
190-02451-24_0A
Printed in Taiwan
© 2020 Garmin Ltd. or its subsidiaries