Garmin Reactor 40 Kicker Autopilot Reactor 40 Kicker Mercury 8 through 99 HP I - Page 1

Steering Actuator Installation Examples Reactor™ 40 Kicker Mercury 8 through 9.9 HP Installation Examples You can use these photographic examples to help when following the instructions included with your Reactor 40 Kicker and Mercury 8 through 9.9 HP motor. Removing the Tiller Lock NOTICE: You must use caution when disassembling the motor to remove the tiller lock and installing the steering and throttle actuators. The provided photos are examples, and may not accurately represent your motor. For further information, you may need to consult your motor manufacturer for guidance. Garmin is not responsible for damage caused to your motor when removing the tiller lock or installing this product. NOTE: If your motor has a tiller lock ➊, it must be removed before installing the steering actuator. Remove the bolts ➋ to access the tiller lock assembly. Installing the Steering Actuator Bracket Between the Tiller Arm and Motor Tiller Lock Remove the tiller lock assembly ➌ before installing the linkage arm assembly. Removing the Tiller Lock Complete Steering Actuator Installation Steering Actuator Spacer Stack Order April 2020 © 2020 Garmin Ltd. or its subsidiaries 190-02451-24_0A Printed in Taiwan