Garmin StreetPilot 7500 Owner's Manual for US - Page 51

Guidance-turn on the vocal guidance prompts. Select Speak Key Only to hear the voice prompts only when you press the Speak key on the remote control. Attention Tone-turn on or off the attention tone sounded before voice prompts. Touch Screen Tone-turn on or off the tone sounded each time you touch the screen. Keypress Tone-turn on or off the tone sounded each time you press a button on the remote. Speed Adjusted Volume-select how much the volume increases as your speed increases: Low, Medium, or High. To manually control the volume, select Off. Audio Jack-select Headphones when using headphones. Select Line Out if you are connecting to the audio input of another device (like a car stereo), and excessive audio noise is heard. Customizing Your StreetPilot Configuring Video Input The StreetPilot supports NTSC (North America) and PAL (Australia) composite video input. From the Menu page, touch Settings > General > Video Input. Input Type-select the video input type: DVD/video or Backup Camera. For more information about setting up the backup camera, see page 34. Detection Response-select how the StreetPilot switches to the video. This setting changes to Reverse Response when Backup Camera is selected. Volume-opens the Adjust Volume Level page. See page 41. View Source-displays the video source. Note: When you switch from the video input to the navigation screens, the screen momentarily turns black and then the navigation screens appear. This is normal. StreetPilot 7200/7500 Owner's Manual 43