Garmin TT 15 Mini Dog Device Owners Manual Web - Page 20

Saving Energy While Charging the Device You can turn off the device display and all other features while charging. 1 Connect your device to an external power source. The remaining battery capacity appears. 2 Hold the power key for 4 to 5 seconds. The display turns off, and the device goes into a low power, battery charging mode. 3 Charge the device completely. Data Management You can store files on your device. The device has a memory card slot for additional data storage. NOTE: The device is not compatible with Windows® 95, 98, Me, Windows NT®, and Mac® OS 10.3 and earlier. File Types The handheld device supports these file types. • Files from BaseCamp. Go to www.garmin.com/trip_planning. • JPEG photo files. • GPX files. • GPI custom POI files from the Garmin POI Loader. Go to www.garmin.com/products/poiloader. Installing a Memory Card WARNING Do not use a sharp object to remove user-replaceable batteries. You can install a microSD memory card in the handheld device for additional storage or pre-loaded maps. 1 Turn the D-ring counter-clockwise, and pull up to remove the cover. 2 Remove the battery. 3 Slide the card holder to the left and lift up. 4 Place the memory card with the gold contacts facing down. 5 Close the card holder. 6 Slide the card holder to the right to lock it. 7 Replace the battery and cover. Connecting the Handheld Device to a Computer NOTICE To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer. 1 Lift the weather cap . 2 Plug the small end of the USB cable into the mini-USB connector on the device. 3 Plug the other end of the USB cable into an available USB port on the computer. Your device and memory card (optional) appear as removable drives in My Computer on Windows computers and as mounted volumes on Mac computers. Connecting the Collar to a Computer NOTICE To prevent corrosion, you should dry the contacts on the collar and the surrounding area before connecting the charging clip. You can connect the collar to your computer to use with programs like BaseCamp. The collar is not a mass storage device. 1 Snap the charging clip onto the collar. 2 Plug the small end of the USB cable into the mini-USB port on the charging clip cable. 3 Plug the other end of the USB cable into a USB port on the computer. Transferring Dog Tracks to BaseCamp You can transfer the dog tracks to BaseCamp. 1 Connect the dog collar device to the computer (Connecting the Collar to a Computer, page 16). The dog collar device turns on automatically. 2 Select on the dog collar device. 3 Open BaseCamp. BaseCamp recognizes the device. 4 Select Device > Receive from Device. 5 Select the dog collar device from the list, and click OK. BaseCamp creates a folder of transferred data in My Collection. Deleting Files NOTICE If you do not know the purpose of a file, do not delete it. Your device memory contains important system files that should not be deleted. 1 Open the Garmin drive or volume. 2 If necessary, open a folder or volume. 3 Select a file. 4 Press the Delete key on your keyboard. Disconnecting the USB Cable If your device is connected to your computer as a removable drive or volume, you must safely disconnect your device from your computer to avoid data loss. If your device is connected to your Windows computer as a portable device, it is not necessary to safely disconnect. 16 Device Information