Garmin VHF 215 AIS Installation Instructions - Page 2
VHF Antenna Mounting and EME Exposure, Bail Mounting the Device, WARNING, CAUTION
View all Garmin VHF 215 AIS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
VHF Antenna Mounting and EME Exposure WARNING Radio operators with cardiac pacemakers, life-support machines, or electrical medical equipment should not be exposed to excessive radio-frequency (RF) fields, because the RF field may interfere with the function of their medical equipment. CAUTION This device generates and radiates radio frequency (RF) electromagnetic energy (EME). Failure to observe these guidelines may expose people to RF radiation absorption exceeding the maximum permissible exposure (MPE). Garmin® declares an MPE radius of 2.48 m (97.64 in.) for this system, which was determined using 5 W output to an omni-directional, 6 dBi gain antenna. The antenna should be installed to maintain a distance of 2.48 m (97.64 in.) between the antenna and all people. Bail Mounting the Device NOTICE If you are mounting the bracket on fiberglass with screws, it is recommended to use a countersink bit to drill a clearance counterbore through only the top gel-coat layer. This will help to avoid cracking in the gel-coat layer when the screws are tightened. You can use the included bracket to bail mount the device on a flat surface. 1 Using the bail-mount bracket as a template, mark the pilot holes. 2 Using a 3.5 mm (9/64 in.) drill bit, drill the pilot holes. 3 Using the included screws , secure the bail-mount bracket to the mounting surface. 4 Install the bail-mount knobs on the sides of the device. 5 Place the device in the bail-mount bracket and tighten the bail-mount knobs. 2