Garmin VIRB XE Aviation Bundle Owners Manual - Page 10

Taking Time-Lapse Photos You can use the time-lapse or extended time-lapse mode to take a series of photos at a set time interval. 1 Hold MENU. 2 Select Photos > Mode. 3 Select Timelapse or Ext. Timelapse. 4 If using extended time-lapse mode, select a start time and duration for the shoot. 5 Select a time interval between photos. 6 While on the home screen, select the key. • Power output in watts (when connected to a compatible power meter) • Temperature (when connected to a compatible temperature sensor) • Automotive data (when connected to a compatible OBD-II device) ANT+ Sensors Your device can be used with wireless ANT+ sensors. For more information about compatibility and purchasing optional sensors, go to http://buy.garmin.com. The device takes a series of photos at the selected interval. The screen displays the remaining number of photos the device can take , the number of photos the device has taken , the elapÀsed time , and the time in seconds until Á Â the next photo is taken . Ã 7 Select to stop taking photos. G-Metrix Your VIRB X/XE device contains built-in GPS, G-force, and orientation sensors. Your device can also wirelessly connect to external ANT+ sensors and other Garmin devices to capture even more performance data. You can use the free Garmin VIRB mobile app or VIRB Edit software application to overlay gauges, graphs, and more. You can then play back your recorded video to show your speed, acceleration, heart rate, and other sensor data in real time. G-Metrix Overlays Your device can record these types of data. • Speed • Pace • Altitude • G-force • Orientation • Hang time • Distance • Grade • Pitch • Roll • Bearing (when moving) • GPS location (coordinates) • Track shape and position • Lap times • Lap count • Heart rate (when connected to a compatible heart rate monitor) • Cadence (when connected to a compatible bicycle cadence sensor) Pairing Your ANT+ Sensors When you pair a compatible ANT+ sensor with your device, the sensor data is included in the G-Metrix overlays and in the .fit file. 1 Put on the heart rate monitor or install the sensor. 2 Bring the device within 3 m (10 ft.) of the sensor. 3 Hold MENU. 4 Select Sensors > Add New. 5 Select an option: • Select Search All. • Select your sensor type. 6 Select the sensor to pair. After the sensor is paired with your device, the sensor status changes to Connected. While on the home screen, you can select to view sensor data. Tips for Pairing ANT+ Accessories with Your Garmin Device • Verify that the ANT+ accessory is compatible with your Garmin device. • Before you pair the ANT+ accessory with your Garmin device, move 10 m (32.9 ft.) away from other ANT+ accessories. • Bring the Garmin device within range 3 m (10 ft.) of the ANT+ accessory. • After you pair the first time, your Garmin device automatically recognizes the ANT+ accessory each time it is activated. This process occurs automatically when you turn on the Garmin device and only takes a few seconds when the accessories are activated and functioning correctly. • When paired, your Garmin device receives data from only your accessory, and you can go near other accessories. Removing Paired ANT+ Sensors 1 Hold MENU. 2 Select Sensors. 3 Select a sensor. 4 Select Remove > Yes. Bluetooth Devices Connecting a Wireless External Microphone You can connect a Bluetooth hands-free device with your VIRB X/XE device. 1 Hold MENU. 2 Select Bluetooth > Status to turn on Bluetooth wireless technology. 3 Select Add New. 4 Select the wireless device to pair. 6 G-Metrix