Garmin Zumo 660 Quick Start Manual - Page 3

Installing the Battery 1. Locate the lithium‑ion battery that came in the product box. 2. Slide the release key until the battery cover on the back of the zūmo pops up. 3. Locate the metal contacts on the end of the lithium‑ion battery. 4. Insert the battery so that the metal contacts on the battery match with the metal contacts inside the battery compartment. 5. Replace battery cover. Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit from the vehicle when exiting or store it out of direct sunlight. Ways to Charge Your zūmo Battery • Use the automotive power cable. • Use the USB cable. • Use an optional AC adapter cable. • Use an optional battery charger Warning: Always keep the battery installed when the zūmo is on. Configuring Your zūmo To turn on your zūmo, press the Power button. Follow the on-screen instructions. Acquiring Satellites 1. Go outdoors to an open area, out of garages, and away from tall buildings. 2. Stop your vehicle, and turn on the zūmo. Acquiring satellite signals may take a few minutes. The bars indicate GPS satellite strength. When one bar is green, the zūmo has acquired satellite signals. Now you can select a destination and navigate to it. Using the Menu Page ➏ ➐ ➑➒ ➓ ➊ GPS satellite strength. ➋ Bluetooth® technology status. ➌ Touch to select motorcyle, scooter, automobile, or pedestrian mode. ➍ Battery status. ➎ Current time. Touch to change settings. ➏ Touch to find a destination. ➐ Touch to view the map. ➑ Touch to make a call when connected to a compatible mobile phone. ➒ Touch to adjust the volume. ➓ Touch to use the tools such as settings, Where Am I?, Help, and routes.