Garmin aera 560 Automotive Quick Start Manual - Page 3
Installing the Battery, Charging Your aera, Mounting Your aera in an, Automobile - accessories
View all Garmin aera 560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Installing the Battery 1. Locate the lithium‑ion battery that came in the product box. 2. Slide the release key until the battery cover on the back of the aera pops up. 3. Remove the battery cover. 4. Locate the metal contacts on the end of the lithium‑ion battery. 5. Insert the battery so that the metal contacts on the battery match with the metal contacts inside the battery compartment. 6. Replace the battery cover. WARNING: This product contains a lithium-ion battery. To prevent injury or damage, remove the unit from the vehicle when exiting or store it out of direct sunlight. Charging Your aera Charge your aera for at least 4 hours before using on battery power. • Connect the vehicle power cable. • Connect the USB cable to the mini-USB connector located under the battery cover. • Connect an AC adapter (if included). • Use a battery charger (optional accessory). NOTE: Do not connect the USB cable or AC adapter to the mini-USB connector on the cradle. Mounting Your aera in an Automobile 1. Plug the vehicle power cable into the power connector on the right side of the cradle. Release button Cradle Vehicle power cable 2. Remove the clear plastic from the bottom of the friction mount. 3. Place the friction mount on your dashboard so it is easily accessible. 4. Lift and push the friction mount arm toward the windshield. Friction mount arm 5. Snap the cradle onto the friction mount arm. 6. Fit the bottom of your aera into the cradle. aera 500 series quick start manual