Garmin dezl OTR1000 Owners Manual - Page 7
Device Overview, Mounting and Powering the Device in Your, Vehicle
View all Garmin dezl OTR1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. • Update the maps and software on your device (Updating Maps and Software Using a Wi‑Fi Network, page 24). • Mount the device in your vehicle and connect it to power (Mounting and Powering the Device in Your Vehicle, page 1). • Adjust the volume (Adjusting Sound and Notification Volume, page 23) and display brightness (Adjusting the Screen Brightness, page 3). • Set up a vehicle profile for your truck (Adding a Vehicle Profile, page 3). • Navigate to your destination (Starting a Route, page 5). Device Overview internal medical devices and electronic devices, including pacemakers, insulin pumps, or hard drives in laptop computers. Keep the device away from medical devices and electronic devices. Before you use your device on battery power, you should charge it. 1 Open the lever , press the suction cup to the windshield, and flip the lever back toward the windshield. The lever must be oriented toward the top of the windshield. 2 Plug the vehicle power cable into the port on the mount. 3 If necessary, loosen the thumbscrew on the suction cup arm and the nut on the ball mount , and adjust the mount for better viewing and operation. Microphone for hands-free calling and voice command Volume control Power key Micro USB power and data port Map and data memory card slot Magnetic mount interface with 14-pin connector Speaker Mounting and Powering the Device in Your Vehicle WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight. Both the device and its mount contain magnets. Under certain circumstances, magnets may cause interference with some Getting Started 4 Tighten the thumbscrew on the suction cup arm and the nut on the ball mount. 5 Place the device onto the magnetic mount. 6 Plug the other end of the vehicle power cable into a power outlet in your vehicle. 1