Garmin echoMAP 70s Owner's Manual - Page 58
WaYpoint Ids, Serial Port 2
View all Garmin echoMAP 70s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Configuring the Chartplotter Serial Port 2 (if supported)-configures the input/output format for serial port 2 to use when connecting your chartplotter to external NMEA devices, a computer, or other Garmin devices. NMEA 0183 Setup-enable or disable NMEA 0183 output sentences for sounder, route, system, and Garmin NMEA settings. To enable or disable NMEA 0183 output sentences: 1. From the Home screen, select Configure > Communications > NMEA 0183 Setup. 2. Select a setting (Sounder, Route, System, or Garmin). 3. Select the NMEA 0183 output sentence to toggle the output on or off. • Posn. Precision-adjust the number of digits (Two Digits, Three Digits, or Four Digits) to the right of the decimal point for transmission of NMEA output. • Waypoint IDs-determine how the unit identifies waypoint identifiers (Names or Numbers). • Defaults-resets all NMEA 0183 sentences to the default setting. NMEA 2000 Setup- • Device List-lists the NMEA 2000 devices on your network. If a NMEA 2000 device has configuration options or settings, select the device for a list of options. • Label Devices-allows you to name your engines and tanks so that you can better identify their location on the boat. To label engines as numbers: From the Home screen, select Configure > Communications > NMEA 2000 Setup > Label Devices > Change Engine Labels > Use Numbers. To label engines as names: 1. From the Home screen, select Configure > Communications > NMEA 2000 Setup > Label Devices > Change Engine Labels > Label Type > Choose Names. 2. Select the engine you want to name. 3. Select the location of the engine: Port (P), Center (C), Starboard (S), Fore (F), or Aft (A). 4. Select the label you want to use for the engine. To label tanks as numbers: 1. From the Home screen, select Configure > Communications > NMEA 2000 Setup > Label Devices > Change Tank Labels. 2. Select the type of tank you want to label. 3. Select Use Numbers. To label tanks as names: 1. From the Home screen, select Configure > Communications > NMEA 2000 Setup > Label Devices > Change Tank Labels. 52 GPSMAP 400/500 Series Owner's Manual