Garmin iQue 3600 Que Applications Guide - Page 15

To use QueGPS options: 1. Tap the QueGPS application tab or the Menu icon to display the Options Menu. 2. Observe the list of options: • Tap Preferences to display the GPS preference options. • When in 2D mode, tap New Elevation to reset the elevation. • Tap New Location when initializing the GPS Receiver if you have moved over 600 miles from your last use location or if you have not powered up the unit in over thirty days. To use QueGPS preferences: 1. Tap the Preferences option to display the GPS Preferences Menu. 2. Observe the list of options with check boxes: • Tap WAAS Enabled to enable the Wide Area Augmentation System operating mode. (See Additional Information about WAAS on page 57.) • Tap Battery Saver to change the rate at which the GPS receive updates your position data to conserve battery power. The GPS receiver slows the frequency at which it calculates your location and therefore requires less battery power with the result being a slight loss in position accuracy. The GPS is turned completely Off when the antenna is fully closed. You cannot operate in the WAAS and Battery Saver modes at the same time. If you attempt to check both boxes, a message will display and the last option checked will remain on after you tap the OK button. iQue 3600 GPS Applications QueGPS Options Select New Location for Initialization Set New Elevation Preference Settings QueGPS Options QueGPS Preferences Menu 5