Garmin nuvi 5000 Owner's Manual - Page 31

Using FM Traffic, LED Blink Codes, Traffic - antenna

Page 31 highlights

Using FM Traffic Use an FM TMC (Traffic Message Channel) traffic receiver to receive traffic information broadcast over the FM Radio Data System. For information about FM traffic receivers and coverage areas, see www.garmin.com/traffic. note: Garmin is not responsible for the accuracy of the traffic information. The FM traffic receiver receives signals from the traffic service provider and shows that information on your nüvi. note: The FM traffic receiver and nüvi must be in data range of an FM station transmitting TMC data to receive traffic information. note: The nüvi must be connected to the optional FM traffic receiver to access traffic information. Using FM Traffic To the power outlet in the vehicle To the power connector on the nüvi cradle Power LED Status LED note: If your FM TMC traffic receiver has an antenna with suction cups on it, route the antenna on your windshield vertically using the suction cups. LED Blink Codes The green Power LED lights when connected to external power. The Status LED indicates the signal reception: • Yellow dot-dash flashes: determining which country you are currently in. • Yellow solid: searching for signal. • Red solid: momentary sync loss. • Green solid: normal traffic data. nüvi 5000 Owner's Manual25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

nüvi 5000 Owner’s Manual
²5
Using FM Traffic
Using FM
Traffic
Use an FM TMC (Traffic Message
Channel)
traffic receiver to receive
traffic information broadcast over the
FM Radio Data System. For information
about FM traffic
receivers and coverage
areas, see
www.garmin.com/traffi
c
.
NOTE:
Garmin is not responsible for
the accuracy of the traffic information.
The FM traffic receiver receives
signals from the traffic service
provider and shows that information
on your nüvi.
NOTE:
The FM traffic receiver and
nüvi must be in data range of an FM
station transmitting TMC data to
receive traffic information.
NOTE:
The nüvi must be connected
to the optional FM traffic receiver to
access traffic information.
NOTE:
If your FM TMC traffic
receiver has an antenna with suction
cups on it, route the antenna on your
windshield vertically using the suction
cups.
LED Blink Codes
The green Power LED lights when
connected to external power. The Status
LED indicates the signal reception:
Yellow dot-dash flashes: determining
which country you are currently in.
Yellow solid: searching for signal.
Red solid: momentary sync loss.
Green solid: normal traffic data.
To the power outlet
in the vehicle
To the power
connector on the
nüvi cradle
Power
LED
Status
LED