Garmin nuvi 600 Owner's Manual - Page 8
Step 1: Mounting the nüvi
View all Garmin nuvi 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started Step 1: Mounting the nüvi Check your state and local traffic laws before mounting. Currently, state laws in California and Minnesota prohibit drivers from using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard or friction mounting options should be used. See page 37. Mounting the nüvi on Your Windshield 1. Plug the vehicle power cable into the power connector on the back of the cradle. 2. Clean and dry your windshield and the suction cup with a lint-free cloth. Place the suction cup on the windshield. 3. Flip the lever back, toward the windshield. 4. Flip up the GPS antenna. Fit the bottom of your nüvi into the cradle. 5. Tilt the nüvi back until it snaps into place. 6. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in and your vehicle is running. 7. If you are using an optional GMT 21 FM TMC Traffic Receiver, secure the traffic antenna to the windshield using the suction cups. ➋ Windshield ➎ ➊ ➌ ➍ nüvi 600/650 Owner's Manual