Garmin nuvi 880 Owner's Manual - Page 45

Using FM Traffic, LED Blink Codes

Page 45 highlights

Using FM Traffic The traffic receiver is included in some nüvi packages. Use an FM TMC (Traffic Message Channel) traffic receiver to receive traffic information that is broadcast over the FM Radio Data System. For information about FM traffic receivers and coverage areas, see www.garmin .com/traffic. Note: Garmin is not responsible for the accuracy of the traffic information. The FM traffic receiver receives signals from the traffic service provider and displays that information on your nüvi. Note: The FM traffic receiver and the nüvi must be in data range of an FM station transmitting TMC data to receive traffic information. To power outlet in vehicle Power LED Status LED Using FM Traffic To power connector on nüvi cradle Note: If your FM TMC traffic receiver has an antenna with suction cups on it, route the antenna on your windshield vertically using the suction cups. LED Blink Codes The green Power LED lights when connected to external power. The Status LED indicates the signal reception: • Yellow dot-dash flashes- determining which country you are currently in. • Yellow solid-searching for signal. • Red solid-momentary sync loss. • Green solid-normal traffic data. nüvi 800 Series Owner's Manual39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

nüvi 800 Series Owner’s Manual
³¸
Using FM Traffic
Using FM
Traffic
The traffic receiver is included in some
nüvi packages.
Use an FM TMC (Traffic Message
Channel) traffic receiver to receive
traffic information that is broadcast
over the FM Radio Data System. For
information about FM traffic receivers
and coverage areas, see
www.garmin
.com/traffi
c
.
NOTE:
Garmin is not responsible for
the accuracy of the traffic information.
The FM traffic receiver receives
signals from the traffic service
provider and displays that information
on your nüvi.
NOTE:
The FM traffic receiver and
the nüvi must be in data range of an
FM station transmitting TMC data to
receive traffic information.
To power connector
on nüvi cradle
To power outlet
in vehicle
Power
LED
Status
LED
NOTE:
If your FM TMC traffic
receiver has an antenna with suction
cups on it, route the antenna on your
windshield vertically using the suction
cups.
LED Blink Codes
The green Power LED lights when
connected to external power. The Status
LED indicates the signal reception:
Yellow dot-dash flashes
determining which country you are
currently in.
Yellow solid
—searching for signal.
Red solid
—momentary sync loss.
Green solid
—normal traffic data.