Garmin tactix Delta - Solar Edition with Ballistics Owners Manual - Page 44

Using the Stress Level Widget The stress level widget displays your current stress level and a graph of your stress level for the last several hours. It can also guide you through a breathing activity to help you relax. 1 While you are sitting or inactive, press UP or DOWN from the watch face to view the stress level widget. 2 Press START to begin measuring. TIP: If you are too active for the watch to determine your stress level, a message appears instead of a stress level number. You can check your stress level again after several minutes of inactivity. 3 Press DOWN to view a graph of your stress level for the last four hours. Blue bars indicate periods of rest. Yellow bars indicate periods of stress. Gray bars indicate times when you were too active to determine your stress level. 4 To start a breathing activity, press DOWN > START, and enter a duration for the breathing activity in minutes. Customizing the My Day Widget You can customize the list of metrics displayed on the My Day widget. 1 From the watch face, press UP or DOWN to view the My Day widget. 2 Hold MENU. 3 Select Options. 4 Select the toggle switches to show or hide each metric. Customizing the Controls Menu You can add, remove, and change the order of the shortcut menu options in the controls menu (Viewing the Controls Menu, page 1). 1 Hold MENU. 2 Select Controls. 3 Select a shortcut to customize. 4 Select an option: • Select Reorder to change the location of the shortcut in the controls menu. • Select Remove to remove the shortcut from the controls menu. 5 If necessary, select Add New to add an additional shortcut to the controls menu. Watch Face Settings You can customize the appearance of the watch face by selecting the layout, colors, and additional data. You can also download custom watch faces from the Connect IQ store. Customizing the Watch Face Before you can activate a Connect IQ watch face, you must install a watch face from the Connect IQ store (Connect IQ Features, page 14). You can customize the watch face information and appearance, or activate an installed Connect IQ watch face. 1 From the watch face, hold MENU. 2 Select Watch Face. 3 Press UP or DOWN to preview the watch face options. 4 Select Add New to scroll through additional pre-loaded watch faces. 5 Select START > Apply to activate a pre-loaded watch face or an installed Connect IQ watch face. 6 If using a pre-loaded watch face, select START > Customize. 7 Select an option: • To change the style of the numbers for the analog watch face, select Dial. • To change the sport for the gauges on the performance watch face, select Select Sport. • To change the style of the hands for the analog watch face, select Hands. • To change the style of the numbers for the digital watch face, select Layout. • To change the style of the seconds for the digital watch face, select Seconds. • To change the data that appears on the watch face, select Data. • To add or change an accent color for the watch face, select Accent Color. • To change the background color, select Bkgd. Color. • To save the changes, select Done. Sensors Settings Compass Settings Hold MENU, and select Sensors & Accessories > Compass. Calibrate: Allows you to manually calibrate the compass sensor (Calibrating the Compass Manually, page 38). Display: Sets the directional heading on the compass to letters, degrees, or milliradians. North Ref.: Sets the north reference of the compass (Setting the North Reference, page 38). Mode: Sets the compass to use electronic-sensor data only (On), a combination of GPS and electronic-sensor data when moving (Auto), or GPS data only (Off). Calibrating the Compass Manually NOTICE Calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near objects that influence magnetic fields, such as vehicles, buildings, and overhead power lines. Your device was already calibrated at the factory, and the device uses automatic calibration by default. If you experience irregular compass behavior, for example, after moving long distances or after extreme temperature changes, you can manually calibrate the compass. 1 Hold MENU. 2 Select Sensors & Accessories > Compass > Calibrate > Start. 3 Follow the on-screen instructions. TIP: Move your wrist in a small figure eight motion until a message appears. Setting the North Reference You can set the directional reference used in calculating heading information. 1 Hold MENU. 2 Select Sensors & Accessories > Compass > North Ref.. 3 Select an option: • To set geographic north as the heading reference, select True. • To set the magnetic declination for your location automatically, select Magnetic. • To set grid north (000º) as the heading reference, select Grid. • To set the magnetic variation value manually, select User, enter the magnetic variance, and select Done. 38 Customizing Your Device