Gateway 960 Installing Your Gateway 960 or 980 Server into a Rackmount Cabinet - Page 12
To remove the server feet
View all Gateway 960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing Your Gateway Server into a Rackmount Cabinet 3 Slide the side panel toward the front of the case, then lift the panel away from the case. Store the side panel in case you need to reinstall it later. To remove the server feet: 1 Use needle-nose pliers to grip the server foot anchor, pull the anchor straight out, then remove the server foot. - OR - Use a flat-blade screwdriver to pry the server foot anchor up, pull the anchor straight out, then remove the server foot. 2 Repeat Step 1 for the three remaining server feet. 8 www.gateway.com
8
Installing Your Gateway Server into a Rackmount Cabinet
www.gateway.com
3
Slide the side panel toward the front of the case, then lift the panel away
from the case. Store the side panel in case you need to reinstall it later.
To remove the server feet:
1
Use needle-nose pliers to grip the server foot anchor, pull the anchor
straight out, then remove the server foot.
- OR -
Use a flat-blade screwdriver to pry the server foot anchor up, pull the
anchor straight out, then remove the server foot.
2
Repeat Step 1 for the three remaining server feet.