Gateway DX4200-UB001A 8513028 - Gateway Hardware Reference Guide - Page 53
Adding or replacing a, hard drive
View all Gateway DX4200-UB001A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
www.gateway.com Adding or replacing a hard drive To add or replace a hard drive: Tools You need a Phillips screwdriver to add or replace a hard drive. 1 Remove the left side panel by following the instructions in "Removing the left side panel" on page 35. 2 Disconnect and label all hard drive cables, noting their locations and orientation. (You will reconnect the cables after you install the new drive.) Drive data cable Drive power cable 3 If you are replacing a drive, remove the screws that secure the hard drive to the hard drive cage, then slide the old hard drive out of the cage. Hard drive screws 47
www.gateway.com
47
Adding or replacing a
hard drive
To add or replace a hard drive:
1
Remove the left side panel by following the instructions
in
“Removing the left side panel” on page 35
.
2
Disconnect and label all hard drive cables, noting their
locations and orientation. (You will reconnect the cables
after you install the new drive.)
3
If you are replacing a drive, remove the screws that
secure the hard drive to the hard drive cage, then slide
the old hard drive out of the cage.
Tools
You need a Phillips screwdriver to add or replace a hard drive.
Drive data cable
Drive power cable
Hard drive screws