Gateway DX4640-UB101A 8513028 - Gateway Hardware Reference Guide - Page 48
Start, Computer, Properties
View all Gateway DX4640-UB101A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
CHAPTER 4: Upgrading Your Computer 4 If you are removing a memory module from a memory slot, gently pull the plastic tabs away from the sides of the memory module and remove it. - OR If you are adding a memory module to an empty memory slot, gently pull the plastic tabs away from the sides of the memory slot. 5 Align the notch on the new module with the notch in the memory slot and press the module firmly into the slot. The tabs on the sides of the memory slot should secure the memory module automatically. 6 Replace the side panel by following the instructions in "Replacing the side panels" on page 39. 7 Return your computer to its upright position. 8 Reconnect the cables and the power cord. 9 Turn on your computer. Windows starts and the Windows desktop appears. 10 Click (Start), right-click Computer, then click Properties. The amount of memory in your computer is displayed. 42