Gateway FHD2402 Gateway FHD2402 24-inch Widescreen LCD Monitor User Guide - Page 12

CHAPTER 1: Using Your Gateway Flat-Panel Monitor Adjusting the angle Ergonomic guidelines The recommended screen positioning is based upon the following guildelines. These guidelines are based on available scientific literature and published standards. Screen height The recommended screen height for displays (except in special circumstances, such as for bifocal use) is that the top of the display should be set at or slightly below (about 1 inch or 25 mm) your eye level while you are sitting in a comfortable working posture. This guideline places the center of the screen at an ideal 15° to 20° viewing angle for most desktop displays. If the display has multiple users, the screen height should be easily adjustable to accommodate each user's height and preference. Screen tilt The screen should be tilted so your line of sight is perpendicular to the screen. This angle creates the most consistent viewing distance when scanning from the top of the screen to the bottom. You may need to adjust lighting to avoid screen glare when the screen is tilted upward. Screen distance from user The screen should first be placed at arm's length from the user, then adjusted back and forth to suit individual preference. . Starting the monitor Using the EzTouch menu buttons This monitor features an onscreen display (OSD) and EzTouch menu buttons that let you turn the monitor on and off, and adjust contrast, brightness, and other settings. For more information on EzTouch buttons, see "Using the EzTouch menu buttons" on page 9. Turning on the monitor To start the monitor: 1 Press the power button on the right hand side of the monitor. The power LED on the front panel close to the power button changes from purple (off) to blue (on). 2 Turn on your computer. After your computer is running, the power LED on the monitor's power button should be blue. Allow about 10 seconds for the display image to appear. If the power LED is not blue or you do not see a display image, check the connections. For more troubleshooting information, see "Troubleshooting" on page 15. 3 Adjust the tilt of the monitor for the best viewing angle. 4 After you see the Windows desktop, press the lit button on the front of your monitor to call out the menu, then press (Auto) to automatically adjust your display image to the ideal settings. 5 Use the onscreen display (OSD) to adjust other monitor settings. For more information, see "Adjusting monitor settings" on page 9. 8