Gateway FX6800 8513213 - FX Hardware Reference Guide - Page 17
Plug USB Universal Serial Bus devices such - 11
View all Gateway FX6800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
www.gateway.com Component Icon Power connector Voltage switch PS/2 keyboard port Integrated monitor (VGA) port ESATA port USB ports Headphone/analog speakers jack (green) -ORFront speakers jack Microphone jack (pink) S/PDIF output jack Center/subwoofer jack (orange) Modem jack (optional) Case cover Phillips screws Description Plug the power cord into this connector. Make sure this switch is set to the proper local voltage. Plug a PS/2 keyboard into this port. Connect a VGA monitor to this port if the optional add-in video card is not installed. Connect an external SATA drive to this port. Plug USB (Universal Serial Bus) devices (such as a USB printer, scanner, camera, keyboard, or mouse) into these ports. For more information, see "Installing a printer, scanner, or other device" on page 34. This jack is user configurable for one of the following: ■ Headphone: Plug headphones or amplified speakers into this jack (Default). ■ Stereo out: Plug your front left and right speakers into this jack. This jack is disabled when an audio expansion card is installed. For more information, see "Configuring the audio jacks" on page 33. Plug a microphone into this jack. This jack is disabled when an audio expansion card is installed. Plug an optical cable from an amplifier or entertainment system into this jack for digital sound. Plug your center speaker and subwoofer into this jack. This jack is disabled when an audio expansion card is installed. For more information, see "Configuring the audio jacks" on page 33. Plug a modem cable into this jack. For more information, see "Connecting a dial-up modem" on page 17. Remove these screws to remove the left side panel. 11