Gateway GT5448E 8511861 - Gateway Computer Hardware Reference for Windows Vist - Page 64
Connect the power and data cables using your notes
UPC - 827103133981
View all Gateway GT5448E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
CHAPTER 4: Upgrading Your Computer 17 Release the processor from the old system board by pushing down on the lever, then lifting it completely up. 18 Remove the processor from the old system board. 19 Install the processor onto the new system board making sure that Pin 1 on the processor (indicated by the silk-screened arrow on the corner of the processor) aligns with Pin 1 on the processor socket (indicated by the absence of a pin hole in the processor socket), then return the lever to its locked position. 20 Place the heat sink over the processor, then tighten the screws that secure it to the system board. 21 Install the power supply into the case, then install the three screws to secure the power supply to the case. 22 Connect the power and data cables using your notes from Step 9. 23 Install the memory you removed previously. 24 Connect the fan cable to the system board, then insert the fan into place. 25 Reinstall any expansion cards you removed. 26 Replace the side panel by following the instructions in "Replacing the side panel" on page 33. 58