Gateway M-1617 8512320 - Gateway Notebook Reference Guide R0 - Page 110
Replace the memory bay cover, then tighten the cover, Insert the battery
View all Gateway M-1617 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
CHAPTER 8: Upgrading Your Notebook 9 Pull the memory module out of the slot. 10 Hold the new or replacement module at a 30-degree angle and press it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay. 11 Replace the memory bay cover, then tighten the cover screw. 12 Insert the battery, then turn your notebook over. 13 Connect the power adapter, modem cable, and network cable. 14 Reconnect all peripheral devices and replace any Express cards. 104
CHAPTER
8
: Upgrading Your Notebook
104
9
Pull the memory module out of the slot.
10
Hold the new or replacement module at a 30-degree
angle and press it into the empty memory slot. This
module is keyed so it can only be inserted in one
direction. If the module does not fit, make sure that the
notch in the module lines up with the tab in the memory
bay.
11
Replace the memory bay cover, then tighten the cover
screw.
12
Insert the battery, then turn your notebook over.
13
Connect the power adapter, modem cable, and network
cable.
14
Reconnect all peripheral devices and replace any
Express cards.