Gateway M-6323 8512565 - Component Replacement Manual R1 - Page 9
can only be inserted in one direction. If the module does not fit
View all Gateway M-6323 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Replacing a Memory Module 2 9 If you are removing a module, gently press outward on the clip at each end of the memory module until the module tilts upward. 10 Pull the memory module out of the slot. Clip 11 Hold the new or replacement module at a 30-degree angle and press it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay. Clip 12 Replace the memory bay cover, then tighten the cover screw. 13 Insert the battery, then turn your notebook over. 14 Connect the power adapter, modem cable, and network cable 15 Reconnect all peripheral devices and replace any Express cards. Technical Support See the label on the bottom of the notebook for Customer Care Information. See your Reference Guide for important safety, regulatory, and legal information. © 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.