Gateway M-6878h 8512949 - Component Replacement Manual R0 - Page 14
Replacing the Wireless Network Module, Move the antenna wires out of the way.
View all Gateway M-6878h manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Replacing the Wireless Network Module 2 11 Unplug the two or three antenna cables. Note which color cable is connected to each of the connectors. 14 Pull the module out of the slot. 12 Move the antenna cables out of the way. 13 Remove the screw(s) securing the wireless network module. Screw 15 Hold the new module at a 30-degree angle and insert it into the empty slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the module slot. 16 Move the antenna wires out of the way. 17 Replace the screw(s) removed in Step 13. 18 Reattach the antenna cables to the connectors. 19 Replace the wireless network bay cover, then tighten the cover screws. 20 Slide the battery into your notebook until it snaps into place. 21 Slide the battery lock to the locked position. 22 Turn your notebook over. 23 Connect the power adapter, modem cable, and network cable 24 Reconnect all peripheral devices and replace any Express cards. Technical Support See the label on the bottom of the notebook for Customer Care Information. See your Reference Guide for important safety, regulatory, and legal information. © 2008 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.