Gateway ML6227v 8511725 - Gateway Service Guide - Page 14
Replace the memory bay cover, then tighten the cover screws., Replace the keyboard screw.
View all Gateway ML6227v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Replacing Notebook Components 6 Pull the memory module out of the slot. 7 Hold the new or replacement module at a 30-degree angle and press it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay. 8 Replace the memory bay cover, then tighten the cover screws. 9 Replace the keyboard screw. Tip The screw hole is marked with a K. 10
Replacing Notebook Components
10
6
Pull the memory module out of the slot.
7
Hold the new or replacement module at a 30-degree angle and press it into the empty
memory slot. This module is keyed so it can only be inserted in one direction. If the module
does not fit, make sure that the notch in the module lines up with the tab in the memory
bay.
8
Replace the memory bay cover, then tighten the cover screws.
9
Replace the keyboard screw.
Tip
The screw hole is marked with a K.