Gateway MT6831 8511725 - Gateway Service Guide - Page 33
Replacing the keyboard cover - drivers
View all Gateway MT6831 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
www.gateway.com Replacing the keyboard cover Tools you need to complete this task: Flat-blade driver - OR - Phillips #0 screwdriver Screws removed during this task: Scribe or non-marring tool 2 black (keyboard cover) To replace the keyboard cover: 1 Complete the steps in "Preparing the notebook" on page 6. 2 Turn the notebook over so the top is facing up. 3 Remove the two keyboard cover screws. Screw Screw 4 Insert the small flat-blade screwdriver under the bottom of each hinge cover and gently pry it up. 5 Carefully open the LCD panel to the fully opened position. 29
www.gateway.com
29
Replacing the keyboard cover
Tools you need to complete this task:
Screws removed during this task:
To replace the keyboard cover:
1
Complete the steps in
“Preparing the notebook” on page 6
.
2
Turn the notebook over so the top is facing up.
3
Remove the two keyboard cover screws.
4
Insert the small flat-blade screwdriver under the bottom of each hinge cover and gently
pry it up.
5
Carefully open the LCD panel to the fully opened position.
Flat-blade driver
Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
2 black (keyboard cover)
Screw
Screw